Референце

1.1 Радови и прегледни радови у међународним часописима

1.1.1  Радови у врхунским међународним часописима (категорија М21)

  • Bošnjak, S., Oguamanam, D., Zrnić, N.: The influence of constructive parameters on response of bucket wheel excavator superstructure in the out-of-resonance region, Archives of Civil and Mechanical Engineering, 15, issue 4, pp. 977-985, 2015.
  • Bošnjak, S., Petković, Z., Simonović, A., Zrnić, N., Gnjatović, N.: ‘Designing – in’ failures and redesign of bucket wheel excavator undercarriage, Engineering Failure Analysis, Vol. 35, pp. 95-103, 2013.
  • Bošnjak, S., Momčilović, D., Petković, Z., Pantelić, M., Gnjatović, N.: Failure investigation of the bucket wheel excavator crawler chain link, Engineering Failure Analysis, Vol. 35, pp. 462-469, 2013.
  • Bošnjak, S., Petković, Z., Atanasovska, I., Milojević, G., Mihajlović, V.: Bucket chain excavator: Failure analysis and redesign of the counterweight boom supporting truss columns, Engineering Failure Analysis, Vol. 32, pp. 322-333, 2013.
  • Bošnjak, S., Arsić, M., Zrnić, N., Rakin, M., Pantelić, M.: Bucket wheel excavator: Integrity assessment of the bucket wheel boom tie-rod welded joint, Engineering Failure Analysis, Vol. 18, issue 1, pp. 212-222, 2011.
  • Bošnjak, S., Pantelić, M., Zrnić, N., Gnjatović, N., Đorđević, M: Failure analysis and reconstruction design of the slewing platform mantle of the bucket wheel excavator O&K SchRs 630, Engineering Failure Analysis, Vol. 18, issue 2, pp. 658-669, 2011.
  • Arsić, M., Bošnjak, S., Zrnić, N., Sedmak, A., Gnjatović, N.: Bucket wheel failure caused by residual stresses in welded joints, Engineering Failure Analysis, Vol. 18, issue 2, pp. 700-712, 2011.
  • Zrnić, N., Gašić, V., Bošnjak, S.: Dynamic responses of a gantry crane system due to a moving body considered as moving oscillator, Archives of Civil and Mechanical Engineering, Vol. 15, issue 1, pp. 243-250, 2015.
  • Trifković, D., Stupar, S., Bošnjak, S., Milovančević, M., Krstić, B., Rajić, Z., Dunjić, M.: Failure analysis of the combat jet aircraft rudder shaft, Engineering Failure Analysis, Vol. 18, issue 8, pp. 1998-2011, 2011.

1.1.2  Радови у истакнутим међународним часописима (категорија М22)

  • Bošnjak, , Arsić, M., Gnjatović, N., Milenović, I., Arsić, D.: Failure of the bucket wheel excavator buckets, Engineering Failure Analysis, Vol. 84, pp. 247-261, 2018.
  • Bošnjak, S., Gnjatović N., Savićević S., Pantelić M., Milenović I.: Basic parameters of the static stability, loads and strengthof the vital parts of a bucket wheel excavator’s slewing superstructure, Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) Vol. 17, issue. 5, pp. 353-365,
  • Bošnjak, S., Arsić, M., Savićević, S,, Milojević, G., Arsić, D.: Fracture analysis of the pulley of a bucket wheel boom hoist system, Eksploatacja i Niezawodnosc – Maintenance and Reliability, Vol. 18, issue 2, pp. 155-163, 2016.
  • Bošnjak, S., Savićević, S., Gnjatović, N., Milenović, I., Pantelić, M.: Disaster of the bucket wheel excavator caused by extreme environmental impact: consequences, rescue and reconstruction, Engineering Failure Analysis, 56, pp. 360-374, 2015.
  • Bošnjak, S., Zrnić, N.: Dynamics, failures, redesigning and environmentally friendly technologies in surface mining systems, Archives of Civil and Mechanical Engineering, Vol. 12, issue 3, pp. 348-359, 2012.
  • Arsić, M., Bošnjak, S., Odanović, Z., Dunjić, M., Simonović, A.: Analysis of the spreader track wheels premature damages, Engineering Failure Analysis, Vol. 20, pp. 118-136, 2012.
  • Bošnjak , Petković Z., Zrnić N., Pantelić M., Obradović A.: Failure analysis and redesign of the bucket wheel excavator two-wheel bogie, Engineering Failure Analysis, Vol. 17, pp. 473-485, 2010.
  • Bošnjak, S., Petković, Z., Zrnić, N., Simić, G., Simonović, A.: Cracks, repair and reconstruction of bucket wheel excavator slewing platform, Engineering Failure Analysis, Vol. 16, issue 5, pp. 1631-1642, 2009.
  • Bošnjak, S., Zrnić, N., Simonović, A., Momčilović, D.: Failure analysis of the end eye connection of the bucket wheel excavator portal tie-rod support, Engineering Failure Analysis, Vol. 16, issue 3, pp. 740-750, 2009.
  • Zrnić, N., Bošnjak, S.: Comments on “Modeling of system dynamics of a slewing flexible beam with moving payload pendulum”, Mechanics Research Communications, Vol. 35, issue 8, pp. 622-624, 2008.

1.1.3  Радови у међународним часописима (категорија М23)

  • Bošnjak, S.: Comments on “Design of aluminium boom and arm for an excavator“, Journal of Terramechanics, Vol. 48, issue 6, pp. 459–462, 2011. (М23 за 2011.)
  • Bošnjak S., Comments on “Determination and analysis of the theoretical production of a bucket wheel excavator“, Archives of Mining Sciences, Vol 60, issue 1, pp. 283–301, 2015.
  • Bošnjak, S., Petković, Z., Gnjatović, N., Milenović, I., Jerman, B.: Impact of the Track Wheel Axles on the Strength of the Bucket Wheel Excavator Two-Wheel Bogie, Tehnički Vjesnik-Technical Gazette, Vol. 20, issue 5, pp. 803-810, 2013.
  • Bošnjak, S., Zrnić, N., Dragović, B.: Dynamic Response of Mobile Elevating Work Platform under Wind Excitation, Strojniški vestnik – Journal of Mechanical Engineering, Vol. 55, issue 2, pp. 104-113, 2009.
  • Bosnjak, S., Petkovic, Z., Dunjic, M., Gnjatovic, N., Djordjevic, M.: Redesign of the vital subsystems as a way of extending the bucket wheel excavators life, Technics Technologies Education Management, Vol. 7, issue 4, pp. 1620-1629, 2012.
  • Zrnić, N., Bošnjak, S., Hoffmann, K.: Parameter sensitivity analysis of non-dimensional models of quayside container cranes, Mathematical and Computer Modelling of Dynamical Systems, Vol. 16, No. 2, pp. 145-160, 2010.
  • Zrnić, N., Hoffmann, K., Bošnjak, S.: Modelling Of Dynamic Interaction Between Structure And Trolley For Mega Container Cranes, Mathematical and Computer Modelling of Dynamical Systems, Vol. 15, No. 3, pp. 295-311, 2009.
  • Rakin, M., Arsić, M., Bošnjak, S., Gnjatović, N., Međo, B.: Integrity Assessment of Bucket Wheel Excavator Welded Structures by Using the Single Selection Method, Tehnički Vjesnik-Technical Gazette, Vol. 20, issue 5, pp. 811-816, 2013.
  • Putić, S., Rakin, M., Bošnjak, S.: Application of the residual strength degradation model to carbon-epoxy composite, Materials Science, Vol. 44, issue 3, pp. 446-450, 2008.
  • Putić, S., Stamenović, M., Bajčeta, B., Stajčić, P., Bošnjak, S.: The influence of high and low temperature on the impact properties of glass-epoxy composites, Journal of the Serbian Chemical Society, Vol. 72, issue 7, 713 – 722, 2007.

1.1.4  Радови у часописима међународног значаја (категорија М24)

  • Bošnjak, S., Gnjatović, N.: The Influence of Geometric Configuration on Response of the Bucket Wheel Excavator Superstructure, FME Transactions, Vol. 44, No. 3, pp. 313-323, 2016.
  • Bošnjak, S., Gnjatović, N., Momčilović, D., Milenović, I., Gašić, V.: Failure analysis of the mobile elevating work platform, Case Studies in Engineering Failure Analysis, Vol 3, pp. 80-87, 2015.
  • Bošnjak, M. S., Arsić, A. M., Zrnić, Đ. N., Odanović, D. Z., Đorđević, D. M.: Failure Analysis of the Stacker Crawler Chain Link, Procedia Engineering, Vol. 10, pp. 2244–2249, 2011.
  • Bošnjak, S., Zrnić, N., Gašić, V., Petković, Z., Milovančević, M.: Dynamic responses of mobile elevating work platform and mega container crane structures, Advanced Materials Research, 562-564, pp. 1539-1543, 2012.
  • Bošnjak, S., Zrnić, N., Gašić, V., Petković, Z., Simonović, A: External Load Variability of Multibucket Machines for Mechanization, Advanced Materials Research, 422, pp. 678-683, 2012.
  • Bošnjak, S., Petković, Z., Zrnić, N., Dunjić, M., Dragović, B.: Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress – Strain Analysis, Advanced Materials Research, 402, pp. 660-665, 2012.
  • Bošnjak, S., Petković, Z., Zrnić, N., Jovković, M.: Dynamics of non-linear mechanism of the door with electric motor drive, Bulletins for Applied and Computer Mathematics, ISSN 0133-3526, BAM – 1499/98, Vol. LXXXV-B, pp. 227-236, PAMM – Centre, 1998.
  • Bošnjak, S., Petković, Z., Zrnić, N., Jovković, M.: Analysis of dynamic behaviour of non-linear mechanism of the door with electric motor drive, Mашиностроение, ISSN 0025-455X, Vol. XLVII, special issue, pp. 59-63, Sofia, Bulgaria, 1998.
  • Zrnić, Đ., Bošnjak, S., Zrnić, N.: On a kinematics, dynamics and strength of mobile elevating platform, Mашиностроение, ISSN 0025-455X, Vol. XLVII, special issue, pp. 64-69, Sofia, Bulgaria, 1998.
  • Cvijović G., Bošnjak S.: The impact of the transition radius lower flange-web on local stress of monorail crane girder, FME Transactions, Vol. 45, No. 4, pp. 543-547, 2017.
  • Zrnić, N., Bošnjak, S., Gašić, V., Arsić, M., Petković, Z.: Failure Analysis of the Tower Crane Counterjib, Procedia Engineering, Vol. 10, pp. 2238–2243, 2011.
  • Arsić, M., Bošnjak, S., Grabulov, V., Veljović, A., Savić, Z.: Analysis of Current State and Integrity Evaluation for the Supply Tank of Generation Unit 6 of Thermal Power Plant Nikola Tesla ”A”, Obrenovac, Advanced Materials Research, Vol. 1029, 14-19, 2014.
  • Arsić, M., Bošnjak, S., Grabulov, V., Mladenović, M., Savić, Z.: Repair Welding Methodology for the Glasses of the Kaplan Turbine Runner at the Hydro Power Plant Djerdap 1, Advanced Materials Research, Vol. 1138, pp. 13-18, 2016.
  • Arsić, M., Bošnjak, S., Sedmak, S,, Šarkoćević, Ž., Savić, Z., Radu, D.: Determination of Damage and Repair Methodology for the Runner Manhole of Kaplan Turbine at the Hydro Power Plant ‘Djerdap 1’, Integritet i vek konstrukcija/Structural Integrity and Life, Vol. 16, No. 3, pp. 149-153, 2016.
  • Sedmak, A., Bošnjak, S., Arsić, M., Sedmak, S., Savić, Z.: Integrity and Life Estimation of Turbine Runner Cover in a Hydro Power Plant, Frattura ed Integrità Strutturale, Vol. 10, No. 36, pp. 63-68, 2016.
  • Arsić, M., Vistać, B., Bošnjak, S., Grabulov, V., Savić, Z.: Methodology for Reparation of Damaged Sleeves and Welded Shield Sections of Guide Vanes at Hydropower Plant DJERDAP 1, Advanced Materials Research, Vol. 1029, 8-13, 2014.
  • Arsić, M., Odanović, Z., Bošnjak, S., Mladenović, M., Savić, Z.: State Analysis and Integrity of Welded Structures of the Upper Ring of the Turbine Runner Guide Vane Apparatus of Hydroelectric Generating Set A6 on Hydro Power Plant Djerdap 1, Advanced Materials Research, Vol. 814, pp. 7-18, 2013.
  • Zrnić, N., Gašić, V., Bošnjak, S., Đorđević, M.: Moving Loads in Structural Dynamics of Cranes: Bridging the Gap Between Theoretical and Practical Researches, FME Transactions, Vol. 41, No. 4, pp. 291-297, 2013.
  • Sedmak, S., Arsić, M., Bošnjak, S., Malešević, Z., Savić, Z., Radu, D.: Effect of Locally Damaged Elbow Segments on the Integrity and Reliability of the Heating System, Integritet i vek konstrukcija/Structural Integrity and Life, Vol. 16, No. 3, pp. 167-170, 2016.
  • Arsić, M., Savić, Z., Sedmak, A., Bosnjak, S., Sedmak, S.: Experimental Examination of Fatigue Life of Welded Joint with Stress Concentration, Frattura ed Integrità Strutturale/Fracture and Structural Integrity, 10, No. 36, pp. 27-35, 2016.
  • Dojčinović, M., Arsić, M., Bošnjak, S., Murariu, A., Malešević, Z.: Cavitation Resistance of Turbine Runner Blades at the Hydro Power Plant ‘Djerdap’, Integritet i vek konstrukcija/Structural Integrity and Life, Vol. 17, No. 1, pp. 55-60, 2017.

1.1.5  Уводна предавања – предавања по позиву на међународним конференцијама (категорија М31)

  • Bošnjak, S., Zrnić, N. Oguamanam, D.: The influence of structural parameters on response of bucket wheel excavator superstructure in the out-of-resonance region, XII International Scientific Conferece “Computer aided Engineering“, Plenary Session, Szklarska Poręba, Poland, 25th-28th June, p. 12, 2014.
  • Bošnjak, S., Oguamanam, D., Zrnić, N.: On the Dynamic Modeling of machines: Part I – Bucket Wheel Excavators, Proceedings of the 18th International Conferece on Material Handling, Constructions and Logistics – MHCL’06, Plenary Session, Faculty of Mechanical Engineering Belgrade, pp. 13-28, Belgrade, 2006.
  • Bošnjak, S., Petković, Z., Gnjatović, N., Milenović, I., Milojević, G.: Strength Analysis of Bucket Wheel Excavator’s Eightwheel Equalizing System, Proceedings of the 13th International Conference Research and Development in Mechanical Industry RaDMI 2013, ISBN 978-86-6075-042-8, SaTCIP, Kopaonik, 12th-15th September, pp. 1-10, 2013. (кат. М33)
  • Bošnjak, S., Zrnić, N., Gašić, V., Petković, Z.: Changeability as a basic working load characteristic of machines for mechanization, Plenary and invitation paper, Proceedings of the 10th International Conference “Research and Development in Mechanical Industry” RaDMI 2010, SaTCIP, ISBN 978-86-6075-017-6, pp. 58-67, Donji Milanovac, 2010.
  • Bošnjak, S., Petković, Z., Zrnić, N., Dragović B., Gnjatović, N.: Comparative stress analysis – The basis of efficient redesign of the bucket wheel excavators substructures, Plenary and invitation paper, Proceedings of the 9th International Conference “Research and Development in Mechanical Industry” RaDMI 2009, SaTCIP, ISBN 978-86-6075-007-7, pp. 15-25, Vrnjačka Banja, 2009.

Релевантни радови презентирани на скуповима

1.1.6 Радови саопштени на скупу међународног значаја, штампани у целини

(категорија М33)

Bošnjak, S., Gnjatović, N., Momčilović, D., Milenović, I., Gašić, V.: Failure Aanalysis of the Mobile Elevating Work Platform, Proceedings of the Sixth International Conference on Engineering Failure Analysis ICEFA VI, Elsevier, Lisbon, Portugal, 6th-9th July, pp. 308-315, 2014.

  • Bošnjak, S., Zrnić, N., Petković, Z.: Numerical-experimental analysis of structural strength of bucket wheel excavator revolving platform, Proceedings of the 2nd International Conference on Material and Component Performance under Variable Amplitude Loading, Vol II, edited by C.M. Sonsino and P.C McKeighan, DVM – Deutscher Verband für Materialforschung und Prüfung, pp. 1185-1193, Darmstadt, 2009.
  • Bošnjak, S., Petković, Z., Zrnić, N., Petrić, S.: Mathematical modeling of dynamic processes of bucket wheel excavators, Proceedings 5th MATHMOD, ARGESIM REPORT, edited by I. Troch and F. Breitenecker, ISBN 3-901608-30-3, pp. 4.1 – 4.10, ARGESIM Verlag, Vienna, 2006.
  • Bošnjak, S., Simonović, A., Zrnić, N., Gnjatović, N.: Calculation of Revolving Platform of Bucket Wheel Excavators, Proceedings of the 1st International Congress of Serbian Society of Mechanics, Section C: Mechanics of Solid Bodies, pp. 319-324, April 10-13, Kopaonik, 2007.
  • Bošnjak, S., Petković, Z., Arsić, M., Gnjatović, N., Milenović, N.: Buckets of the Bucket Wheel Excavators: Failures and Redesign, Proceedings of the 11th International Conference on Accomplishments in Electrical and Mechanical Engineeging and Information Tehnology DEMI 2013, ISBN 978‐99938‐39‐46‐0, University of Banja Luka, Faculty of Mechanical Engineering, Banja Luka, 30th May-1st June, pp. 243-248, 2013.
  • Bošnjak, S., Petković, Z., Gnjatović, N., Mihajlović, V., Milojević, G.: Strength Problems of the Travelling Mechanisms of the Open Pit Machines, Proceedings of the 11th International Conference on Accomplishments in Electrical and Mechanical Engineeging and Information Tehnology DEMI 2013, ISBN 978‐99938‐39‐46‐0, University of Banja Luka, Faculty of Mechanical Engineering, Banja Luka, 30th May-1st June, pp. 249-254, 2013.
  • Bošnjak, S., Petković, Z., Gnjatović, N., Jerman, B., Milenović, I.: Finite Element and Experimental Strength Analysis of the Bucket Wheel Excavator Two-wheel Bogie, Proceedings of the 20th International Conference on Material Handling Constructions and Logistics MHCL 2012, ISBN 978-86-7083-763-8, Faculty of Mechanical Engineering Belgrade, Belgrade, 3rd-5th October, pp. 141-148, 2012.
  • Bošnjak, S., Petković, Z., Đorđević, M., Gnjatović, N., Zrnić, N.: Design improvements of the bucket wheel with drive, Proceedings of the 10th Aniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN 978-99938-39-36-1, University of Banja Luka, Faculty of Mechanical Engineering, Banja Luka, 26 – 28 May, pp. 111-116, 2011.
  • Bošnjak, M. S., Petković, D. Z., Milojević, Z. G., Mihajlović, M. V.: The Design – in Faults as a Causes of the High Performance Machines Failures, Proceedings of the VII Triennial International Conference Heavy Machinery 2011 – HM 2011, ISBN ISBN 978-86-82631-58-3, University of Kragujevac, Faculty of Mechanical Engineering Kraljevo, Vrnjačka Banja, 29 June – 02 July 2011, pp. 55-60 (B SESSION: EARTH-MOVING AND TRANSPORTATION MACHINERY), 2011.
  • Bošnjak, S., Petković, Z., Mihajlović, V., Milojević, G., Milenović, I.: CAD of the special car lifting device, Proceedings of the 11th International Conference Research and Development in Mechanical Industry RaDMI 2011, ISBN 978-86-6075-027-5, SaTCIP, Sokobanja, 15th – 18th September, pp. 444-449, 2011.
  • Bošnjak, S., Petković, Z., Simonović, A., Milovančević, M., Milenović, I.: Structural and contact strength of the revolving dryer, Proceedings of the 11th International Conference Research and Development in Mechanical Industry RaDMI 2011, ISBN 978-86-6075-027-5, SaTCIP, Sokobanja, 15th – 18th September, pp. 450-455, 2011.
  • Bošnjak, S., Petković, Z., Gnjatović, N., Đorđević, M.: Redesign of the Bucket Wheel Excavating Device, Proceedings of the 19th International Conferece on Material Handling, Constructions and Logistics – MHCL’09, Faculty of Mechanical Engineering Belgrade, ISBN: 978-86-7083-672-3, pp. 123-128, Belgrade, 2009.
  • Bošnjak, S., Petković, Z., Zrnić, N., Petrić, S.: Dynamic analysis of hoisting system of bucket wheel excavator boom, Proceedings of the 2nd International Conference „Power Transmissions ’06“, Balkan Association for Power Transmissions, Faculty of Technical Sciences, pp. 493-498, Novi Sad, 2006.
  • Bošnjak, S., Mrdak, S., Glišić, D.: Behaviour analysis of the grab device construction of hydraulic excavator, with pneumatic hammers in working mode, Proc. of the 17th International Conference on Material Handling and Warehousing, Faculty of Mechanical Engineering, pp. 1.22 – 1.26, Belgrade, 2002.
  • Bošnjak, S., Glišić, D.: Determination of cone crusher’s angular velocities, Proc. of the 17th International Conference on Material Handling and Warehousing, Faculty of Mechanical Engineering, pp. 1.17 – 1.21, Belgrade, 2002.
  • Bošnjak, S., Obradović, D., Jovanović, D., Lazić, S.: Analysis of the effect of the design of buckets and teeth on the capacity of O&K UCW-450 bucket wheel excavator for underwater coal mining in the “Kovin” mine, Proc. of the 17th International Conference on Material Handling and Warehousing, Faculty of Mechanical Engineering, pp. 1.13 – 1.16, Belgrade, 2002.
  • Bošnjak, S., Jovković, M.: The choice of indicator of force resisting excavation, Proc. of the 17th International Conference on Material Handling and Warehousing, Faculty of Mechanical Engineering, pp. 1.8 – 1.12, Belgrade, 2002.
  • Bošnjak S., Jovković M.: Kinematics and cutting geometry of bucket wheel excavators, Proc. of the 4th International Scientific conference ”Heavy Machinery”, pp. A.15-A.18, Faculty of Mechanical Engineering Kraljevo, Kraljevo, 2002.
  • Bošnjak, S.: Beitrag zur analyze des entleerungsvorgangs zellenloser schaufelrader, Proc. of the 16th International Conference on Material Handling and Warehousing, pp. 1.199-1.202, Faculty of Mechanical Engineering, Belgrade, 2000.
  • Bošnjak, S., Петковић, З., Јовковић, М.: Simulation of bucket wheel excavators’ and trenchers’ load caused by excavation resisting force, Proc. of the 16th International Conference on Material Handling and Warehousing, pp. 1.203-1.207, Faculty of Mechanical Engineering, Belgrade, 2000.
  • Bošnjak, S., Jovković, M., Petković, Z., Matejić, P.: Specificities in design and calculation of the scissors – type elevating platforms, Proc. of the 15th International Conference on Material Handling and Warehousing, pp. 3.163-3.167, Faculty of Mechanical Engineering, Belgrade, 1998.
  • Bošnjak, S., Jovković, M., Petković, Z., Dunjić, M.: Design and calculation of electric – rised basketball basket structure, Proc. of the 15th International Conference on Material Handling and Warehousing, pp. 3.158-3.162, Faculty of Mechanical Engineering, Belgrade, 1998.
  • Bošnjak, S., Jovković, M., Petković, Z.: Simulation of bucket wheel trencher load caused by force resisting excavation, Proc. of the 15th International Conference on Material Handling and Warehousing, pp. 3.153-3.157, Faculty of Mechanical Engineering, Belgrade, 1998.
  • Bošnjak, S., Zrnić, Đ.: The improvement of the service system using active construction, Proc. of the 14th International conference on material handling and warehousing, pp. 4.188-4.193, Faculty of Mechanical Engineering, Belgrade, 1996.
  • Bošnjak, S., Petković, Z., Brkić, : Spezifizitate der modellierung tragendeder strukture den schwermaschinen fur fördertechnik, Proc. of the 14th International Conference on Material Handling and Warehousing, pp. 2.6-2.15, Faculty of Mechanical Engineering, Belgrade, 1996.
  • Gnjatović, N., Bošnjak, S., Stefanović, A.: The influence of counterweight mass and the degree of approximation of the digging resistance on the dynamic response of the two masts bucket wheel excavator superstructure, In: Proc. of the XXII International conference on material handling, constructions and logistics „MHCL 2017“, pp. 119-128, Faculty of Mechanical Engineering, Belgrade,
  • Arsić, M., Bošnjak, S., Gnjatović, N., Mladenović, M., Savić, Z.: Assessment of integrity and service life of the upper ring of turbine runner guide vane apparatus at hydro power plant ’Đerdap 1’, In: Proc. of the XXII International conference on material handling, constructions and logistics „MHCL 2017“, pp. 231-234, Faculty of Mechanical Engineering, Belgrade,
  • Arsić,, Bošnjak, S., Mladenović, M., Malešević, Z., Savić, Z.: Methodology for the repair of damages that occurred on the welded joints at the body of guide vane apparatus vanes of the vertical Kaplan turbine, In: Proc. of the 8th International Scientific Conference IRMES 2017, pp. 359-364, Trebinje, Bosnia and Herzegovina, 2017.
  • Arsić, M., Bošnjak, S., Grabulov, V., Međo, B., Mladenović, M., Savić, Z.: Repair of damaged surfaces of components of turbine and hydromechanical equipment through the use of cold metallization, In: Proc. of the 18th Symposium on Thermal Science and Engineering of Serbia – SIMTERM 2017, pp. 536-540, Sokobanja, Serbia, 2017.
  • Arsić, M., Bošnjak, S., Grabulov, V., Mladenović, M., Savić, Z.: Use of non-destructive tests for technical diagnostics of condition and assessment of integrity of turbine and hydro-mechanical equipment, Proceedings of the International Conference Power Plants 2016, pp. 1-7, Zlatibor, Serbia, 2016.
  • Zrnić, N., Bošnjak, S., Hoffmann, K.: Application of non-dimensional models in dynamic structural analysis of cranes under moving concentrated load, Proceedings 6th MATHMOD, ARGESIM REPORT No. 35, edited by I. Troch and F. Breitenecker, ISBN 978-3-901608-35-3, pp. 327-336, ARGESIM Verlag/ASIM, Vienna, 2009.
  • Obradović, A., Bošnjak, S., Zrnić, N., Gašić, V.: Аnalysis of dynamic behavior of the bucket wheel excavator boom modeled as an elastic body, Proceeding of 2nd International Congress of Serbian Society of Mechanics (IConSSM 2009), C-21:1-9, Palić (Subotica), Serbia, 2009.
  • Zrnić, Đ., Bošnjak, S.: The improvement of the mobile platform performance using active elements, of the 3rd ECPD International Conference on Advanced Robotics Intelligent Automation and Active Systems, pp. 524-530, Bremen, Germany, 1997.
  • Zrnić, Đ., Bošnjak, S.: Contribution to the improvement of the service system performance using active (inteligent) elements of the system, Proc. of the International Conference on Mechanical Transmissions and Mechanisms, IFToMM, pp. 1096-1100, Tianjin, China, 1997.
  • Arsić, M., Bošnjak, S., Grabulov, V., Mladenović, M., Minić, M.: Analysis of Current State and Integrity Evaluation of the Pipeline at Hydro Power Plant „Pirot“, Proceedings of the 8th International Scientific-Professional Conference Design, Production and Service of Welded Constructions and Products – SBZ 2015, 5-12, Mechanical Engineering Faculty in Slavonski Brod, Croatia, 2015.
  • Arsić, M., Bošnjak, S., Grabulov, V., Milovanović, N., Minić, M., Savić, Z.: Repair of Damages Detected at the Shaft and Ventilation Ring Vanes of the Hydroelectric Generating Set A2 Generator at the Hydro Power Plant ’Pirot’, Proceedings of the 8th International Scientific-Professional Conference Design, Production and Service of Welded Constructions and Products – SBZ 2015, pp. 13-17, Mechanical Engineering Faculty in Slavonski Brod, Croatia, 2015.
  • Arsić, M., Bošnjak, S., Mladenović, M., Savić, Z.: Recommendation for a new model of the maintenance system of turbine and hydromechanical equipment at the hydro power plant Djerdap 1, Proceedings of the 6th International Symposium on Industrial Engineering – SIE 2015, Faculty of Mechanical Engineering, Belgrade, pp. 330 – 333, Serbia, 2015.
  • Arsić, M., Bošnjak, S., Grabulov, V., Vistać, B., Savić, Z.: Influence of Plasticity Reduction on Integrity and Service Life of Turbine Runner Cover of the Hydroelectric Generating Set A4 at Hydro Power Plant Đerdap, Proceedings of The Eighth International Triennial Conference “Heavy Machinery HM 14”, University of Kragujevac – Faculty of Mechanical and Civil Engineering Kraljevo, Zlatibor, June 25-June 28, pp. E.41-E.45., 2014.
  • Arsić, M., Bošnjak, S., Grabulov, V., Burzić, M., Savić, Z.: Reliability for Welded Structures of Bucket Wheel Excavators Based on the Comparison of Operational and Critical Stresses, Proceedings of the 5th Jubilee International Balkan Mining Congress BALKANMINE 2013, ISBN 978-608-65530-2-9, Association of Mining and Geological Engineers of Macedonia, Ohrid, 18th-21st September, pp. 57-63, 2013.
  • Petković, Z., Bošnjak, S., Gnjatović, N., Mihajlović, V., Milojević, G.: Redesign of the BWE SchRs 350 Bucket Wheel Boom, Proceedings of the 20th International Conference on Material Handling Constructions and Logistics MHCL 2012, ISBN 978-86-7083-763-8, Faculty of Mechanical Engineering Belgrade, Belgrade, 3rd-5th October, pp. 149-154, 2012.
  • Arsić, M., Bošnjak, S., Rakin, M., Gnjatović, N., Savić, Z.: Reliability Assessment of welded Joints at Bucket Wheel Excavators based on Hypergeometric Distribution of Defects, Proceedings of the 20th International Conference on Material Handling Constructions and Logistics MHCL 2012, ISBN 978-86-7083-763-8, Faculty of Mechanical Engineering Belgrade, Belgrade, 3rd-5th October, pp. 155-160, 2012.
  • Arsić M., Bošnjak S., Odanović Z., Grabulov V., Vistać B.: Influence of plasticity Reduction on Strength and Fracture of Turbine Runner Cover in Hydro Power Plant Djerdap 1, Proceedings of the First International Conference on Domage Mechanics – ICDM (ISBN 978-86-86115-09-6, ISBN 978-86-7518-153-8), (SR-ID 190448140), Belgrade, pp. 57-60, 2012.
  • Zrnić, N., Bošnjak, S., Gašić, V. Arsić, M.: Some aspects in failure analysis of cranes, Proceedings of the 10th Aniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN 978-99938-39-36-1, University of Banja Luka, Faculty of Mechanical Engineering, Banja Luka, 26 – 28 May, pp. 185-190, 2011.
  • Pantelić, M., Bošnjak, S.: Maintenance and lifecycle of the excavation units, Proceedings of the 10th Aniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN 978-99938-39-36-1, University of Banja Luka, Faculty of Mechanical Engineering, Banja Luka, 26 – 28 May, pp. 967-972, 2011.
  • Petković, D. Z., Bošnjak, M. S., Gnjatović, B. N., Milenović, LJ. I.: The Design and Redesign of Mechanized Slipways, Proceedings of the VII Triennial International Conference Heavy Machinery 2011 – HM 2011, ISBN 978-86-82631-58-3, University of Kragujevac, Faculty of Mechanical Engineering Kraljevo, Vrnjačka Banja, 29 June – 02 July 2011, pp. 13-18 (D SESSION: DESIGN AND MECHANICS), 2011.
  • Pantelić, M., Bošnjak, S., Petković, Z.: Excavation units (re)designing for maintenance, Proceedings of the 11th International Conference Research and Development in Mechanical Industry RaDMI 2011, ISBN 978-86-6075-027-5, SaTCIP, Sokobanja, 15th – 18th September, pp. 265-271, 2011.
  • Arsić, M., Bošnjak, S., Zrnić, N., Petković, Z., Savić, Z.: Analysis of Dynamic Loads of the bucket – Wheel Excavator in Exploitation, The 4th Balkan Mining Congres, ISBN 978-961-269-534-7, pp. 123-120, 2011.
  • Arsić, M., Bošnjak, S., Rakin, M., Odanović, Z., Savić, Z.: Reliability assessment of the Gearbox of the Bucket-Wheel Excavator Excavation Subsystem Based on Failure Analysis, The 4th Balkan Mining Congres, ISBN 978-961-269-534-7, pp. 103-111, 2011.
  • Petković, Z., Bošnjak, S., Gnjatović, N., Đorđević, M.: High – Performance Mechanized Side Slipway for River, Sea and Oversea Ships, Proceedings of the 19th International Conferece on Material Handling, Constructions and Logistics – MHCL’09, Faculty of Mechanical Engineering Belgrade, ISBN: 978-86-7083-672-3, pp. 89-94, Belgrade, 2009.
  • Zrnić, N., Bošnjak, S., Gašić, V.: Parameter sensitivity analysis аs the way of qualitative estimation of high-performance cranes, Proceedings of the 9th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology, pp. 33-38, Banja Luka, Republika Srpska, BiH, 2009.
  • Zrnić, N., Bošnjak, S., Gašić, V.: Application of moving load problem in dynamic analysis of unloading machines with high performances, Proceedings of the 6th Triennial International Conference, Heavy Machinery HM 2008, pp.B.57 – B.62, Kraljevo, 2008.
  • Petković, Z., Bošnjak, S., Gašić, V.: Comparative stress/deformation analysis of temporary support for reconstruction of furnace modeled with linear, shell and solid finite elements, Proceedings of IV International Conference Research and Development in Mechanical Industry, pp. 729 – 735, RaDMI 2004.
  • Petković, Z, Bošnjak, S., Jovković, M., Zrnić, N.: An analysis of rheo-linearity effect upon the dynamic performance of the bucket wheel excavator, Proc. of the 3rd International Scietific Conference ”Heavy Machinery”, pp. 2.15-2.20, Faculty of Mechanical Engineering Kraljevo, Kraljevo, 1999.
  • Petković, Z., Bošnjak, S., Obradović, A., Matejić, P.: Influence of the tightner inclination angle of the bucket wheel excavator boom to its dynamic behaviour, Proc. of the 15th International Conference on Material Handling and Warehousing, pp. 3.212-3.216, Faculty of Mechanical Engineering, Belgrade, 1998.
  • Petković, Z., Bošnjak, S., Zrnić, N.: On a method for dynamic identification of bucket whell excavators in possible resonant conditions, Proc. of the 119th Pannonian Applied Mathematical Meeting, Vol. I, pp. 145-151, Tehnical University of Košice, Herlany, Slovakia, 1997.
  • Petković, Z., Bošnjak, S., Zrnić, N.: About dynamic coefficients of carrying structures of machines for mechanization, Proc. of the 14th International Conference on Material Handling and Warehousing, pp. 4.127-4.134, Faculty of Mechanical Engineering, Belgrade, 1996.
  • Zrnić, Đ., Bošnjak, S., Kosanić, N.: Development of the flexible automated controled system of monorails – basic modules, Proc. of the 14th International Conference on Material Handling and Warehousing, pp. 3.165-3.172, Faculty of Mechanical Engineering, Belgrade, 1996.
  • Zrnić, Đ., Bošnjak, S., Zrnić, N., Brkić, A.: Development of the flexible automated controled system of monorails-railroad switch constuction, Proc. of the 14th International Conference on Material Handling and Warehousing, pp. 3.153-3.158, Faculty of Mechanical Engineering, Belgrade, 1996.
  • Zrnić, Đ., Bošnjak, S.: Contribution to the improvement of the serving system using active elements (constructions) of the system, of the 2nd ECPD International Conference on Advance Robotics, Intelligent Automation and Activ Systems, pp. 619-624, Vienna, Austria, 1996.
  • Đorđević, M., Zrnić, N., Bošnjak, S.: Resolving a laboratory test rig belt misalignment issue, In: Proc. of the XXII International conference on material handling, constructions and logistics „MHCL 2017“, pp. 63-66, Faculty of Mechanical Engineering, Belgrade, 2017.
  • Đorđević М., Zrnić N., Bošnjak S.: Laboratory Test Rig for Nondestructive Inspection of Steel Cord Belts, In: Proc. of the IX International conference „Heavy Machinery – HM 2017“, pp. 61-68, University of Kragujevac – Faculty of Mechanical and Civil Engineering in Kraljevo, Zlatibor, Serbia, 2017.
  • Arsić, M., Grabulov, V., Bošnjak, S., Milovanović, N., Savić, Z.: Technology of Repair Welding in Zones Where Cracks Were Detected at Generator Rotor Hubs of Hydroelectric Generating Sets at Hydro Power Plant Djerdap 1, Proceedings of the 3rd South-East European Welding Congress „Welding and Joining Technologies for a Sustainable Development and Environment“, National R&D Institute for Welding and Material Testing – ISIM Timisoara, pp. 1-4, Romania, 2015.
  • Međo, B., Arsić, M., Bošnjak, S., Musraty, W., Rakin, M.: Stress Analysis of the Additional Loading Device of the Bridge Crane for Weights up to 500 t, Proceedings of the 21st International Conference on Material Handling, Constructions and Logistics – MHCL ’15, Vienna University of technology (TU WIEN), pp. 221-224, Vienna, Austria, 2015.
  • Međo B., Arsić M., Bošnjak S., Grabulov V., Rakin M.: Analysis of Current State and Integrity Evaluation for the Supply Tank of the Thermal Power Plant Based on the Results of Non-Destructive Testing, Proceedings of the International Conference Power Plants 2014, (ISBN 978-86-7877-024-1), Zlatibor, Serbia, Society of Thermal Engineers of Serbia, pp. 422-431, 2014.
  • Arsić, M., Sedmak, S., Bošnjak, S., Mladenović, M., Savić, Z.: Selection of Steels for Vital Structures and Turbine Components of the Hydro Power Plant ’Djerdap 1’, Proceedings of the 7th International Scientific and Expert Conference of the International TEAM Society – TEAM 2015, Faculty of Mechanical Engineering, University of Belgrade, pp. 558 – 564, Belgrade, Serbia, 2015.
  • Zrnić, N., Hoffmann, K., Bošnjak, S.: 50 Years of STS container cranes in sea ports: 1959-2009, Proceedings of the 9th International Conference “Research and Development in Mechanical Industry” RaDMI 2009, ISBN 978-86-6075-007-7, SaTCIP, pp. 515-524, Vrnjačka Banja, 2009.
  • Zrnić, N., Hoffmann, K., Bošnjak, S.: Development of quayside container cranes for river port terminals, Proceedings of the 8th International Conference “Research and Development in Mechanical Industry” RaDMI 2008, E-10, Užice, 2008.
  • Petković, Z., Gašić, V., Bošnjak, S., Zrnić, N.: Loading capacities curves for HE-A/B section runway beams according to bottom flange bending, Proceedings of the 6th Triennial International Conference, Heavy Machinery HM 2008, pp.B.51 – B.56, Kraljevo, 2008.
  • Zrnić, N., Hoffmann, K., Bošnjak, S.: A note on the history of handling in ports: from ancient to medieval cranes, Proceedings of the 12th IFToMM World Congress, CD Rom, Section History of MMS, Edited by Jean-Pierre Merlet and Marc Dahan, Besancon, June 18-21, France, 2007.
  • Petković, Z., Gašić, V., Bošnjak, S.: Dynamic behaviour analysis of reclaiming bucket chain boom using FEM, Proceedings of the 18th International Conferece on Material Handling, Constructions and Logistics – MHCL’06, Faculty of Mechanical Engineering Belgrade, pp. 87 – 92, Belgrade, 2006.
  • Gašić, V., Petković, Z., Bošnjak, S.: Setting up the dynamic model of boom structure at bridge-type stacker-reclaimer, Proceedings of the 5th International conference, Heavy Machinery HM 2005, pp. IA77 – IA80, Kraljevo, 2005.
  • Petković, Z., Gašić, V., Bošnjak, S., Zrnić N.: Dynamic behaviour simulation of structure of bridge-type stacker-reclaimer, Proceedings of the 5th International conference, Heavy Machinery HM 2005, pp. IA59 – IA64, Kraljevo, 2005.
  • Petković, Z., Marjanović, B. Bošnjak, S.: Comparative presentation of analitical and numerical method for determination of stresses due to local effects of the rail placed in the middle of the double-beam bridge crane band, Proc. of the 16th International Conference on Material Handling and Warehousing, pp. 1.208-1.213, Faculty of Mechanical Engineering, Belgrade, 2000.
  • Petković, Z., Šipka, S., Bošnjak, S., Dunjić, M.: Elastic and parameter stability of the thin-walled beams exposed to eccentric pressure loads, Proc. of the 15th International Conference on Material Handling and Warehousing, pp. 3.207-3.211, Faculty of Mechanical Engineering, Belgrade, 1998.
  • Menjić, M., Tošić, S., Bošnjak, S., Vasiljević, N.: Contribution to the solving of problem of noise and vibrations transfer of the personal elevator¢s rail and cabin vibrations by using the elastic supports, Proc. of the 14th International Conference on Material Handling and Warehousing, pp. 4.47-4.52, Faculty of Mechanical Engineering, Belgrade, 1996.
  • Jovanović, D., Milović, P., Bošnjak, S., Grujić, N.: Analisys of influences of cut parameters and bucket shape on spectrum of the load rotary excavator, Proc. of the 14th International Conference on Material Handling and Warehousing, pp. 4.26-4.29, Faculty of Mechanical Engineering, Belgrade, 1996.
  • Vasiljević, R., Petković, Z., Bošnjak, S.: Applying Finite Element Method for Research Static and Dynamic Properties of Electro-mechanical Two Post Lift, Proceedings of the VII Triennial International Conference Heavy Machinery 2011 – HM 2011, ISBN 978-86-82631-58-3, University of Kragujevac, Faculty of Mechanical Engineering Kraljevo, Vrnjačka Banja, 29 June – 02 July 2011, pp. 99-104 (B SESSION: EARTH-MOVING AND TRANSPORTATION MACHINERY), 2011.
  • Zrnić, N., Đorđević, M., Bošnjak, S., Dragović, B.: Developments of environmental friendly technologies for RTG container cranes, Proceedings of the 10th International Conference “Research and Development in Mechanical Industry” RaDMI 2010, SaTCIP, ISBN 978-86-6075-017-6, pp. 543-548, Donji Milanovac, 2010.
  • Arsić, M., Vistać, B, Grabulov, V., Bošnjak, S., Savić, Z.: Methodology of Repair Welding in Zones where Cracks were Detected on the Casted Part of the Generatorrotor Hub of the Hydroelectric Generatingset A4 at Hydro Power Plant Djerdap 1, Proceedings of the 7th International Scientific – Professional Conference on Contemporary Production Process, Equipment and Materials for Welded Constructions and Products SBZ 2013, ISBN 978-953-6048-72-4, Faculty of Mechanical Engineering Slavonski Brod, Slavonski Brod, 23rd-25th October, pp. 38-49, 2013.
  • Zrnić, N., Đorđević, M., Petković, Z., Bošnjak, S.: Eco Issues in Belt conveying Technologies, Proceedings of the VII Triennial International Conference Heavy Machinery 2011 – HM 2011, ISBN 978-86-82631-58-3, University of Kragujevac, Faculty of Mechanical Engineering Kraljevo, Vrnjačka Banja, 29 June – 02 July 2011, pp. 61-66 (B SESSION: EARTH-MOVING AND TRANSPORTATION MACHINERY), 2011.
  • Gnjatović, N., Pantelić, M., Milenović, I., Stefanović, A., Bošnjak, S.: Approaches in forensic engineering of excavating units operating on open pit mines of Serbia, In: Proc. „Maintenance Forum 2017“, 148-158, Budva, Montenegro, 2017.

1.1.7 Поглавља у монографијама и тематским зборницима (категорија М44)

  • Bošnjak, S., Zrnić, N., Petković, Z.: Bucket wheel excavators and trenchers – Computer added calculation of loads caused by resistance to excavation, Machine Design, monograph edited by S. Kuzmanović, pp. 121-128, University of Novi Sad, ISBN 978-86-7892-105-6, 2008.
  • Bošnjak, S., Zrnić, N., Simonović, A.: Computer aided design and calculation of bucket wheel excavators, Machine Design, monograph edited by S. Kuzmanović, pp. 135-142, University of Novi Sad, ISBN 978-86-7892-038-7, 2007.
  • Zrnić, N., Bošnjak, S., Gašić, V.: Loading capacities curves for I section runway beams according to bottom flange loading and lateral buckling, Machine Design, monograph edited by S. Kuzmanović, pp. 181-186, University of Novi Sad, ISBN 978-86-7892-105-6, 2008.
  • Gašić, V., Zrnić, N., Bošnjak, S.: Computer aided analysis of load/stress/dynamic behaviour for special bridge-type stacker-reclaimer, Machine Design, monograph edited by S. Kuzmanović, pp. 119-126, University of Novi Sad, ISBN 978-86-7892-038-7, 2007.
  • Đorđević, M., Zrnić, N., Bošnjak, S.: LCA of a belt conveyor and its application, Next generation logistics: Technologies and applications, Scientific Publishing Hub (ISBN 978-961-6948-08-1) 175-197, 2016.
  • Zrnić, N., Gašić, V., Obradović, A., Bošnjak, S.: Appropriate modeling of dynamic behavior of quayside container cranes boom under a moving trolley, Springer Proceedings in Physics 139, Vibration problems ICOVP 2011,
    81-86, 2011.

2.1  Књиге

  • Бошњак, С.: Роторни ровокопачи, Машински факултет Универзитета у Београду, 2001.

2.2 Радови објављени у националним часописима и поглавља у монографијама и тематским зборницима

2.2.1  Радови у врхунским часописима националног значаја (категорија М51)

  • Бошњак, С.: Расчет силы тяжести грунта в ковшах роторного экскаватора, Transactions, Vol. XXI, issue 2, pp. 18-22, University of Belgrade, Faculty of Mechanical Engineering, 1992.
  • Bošnjak, S.: About the Problem of Rheo-Linearity in the Dynamics of Bucket Wheel Excavators, Transactions, Vol. XXIV, issue 1, pp. 25-30, University of Belgrade, Faculty of Mechanical Engineering, 1995.
  • Cvijović, G., Bošnjak, S.: Calculation Methods’ Comparative Analysis of Monorail Crane Local Bending Effects, Technics – special edition, pp. 51-58, 2016.
  • Arsić, M., Bošnjak, S., Mladenović, M., Grabulov, V., Savić Z.: Effect of Mechanical Properties of Material on Strength and Resistance to Fracture of the Turbine Runner Cover at Hpp Djerdap 1, Energija (Energija, ekonomija, ekologija), Vol. 15, 3-4, pp. 15-23, 2013.
  • Arsić, M., Bošnjak,, Odanović, Z., Mladenović, M., Milovanović N.: State Analysis of the Upper Ring of the Turbine Runner Guide Vane Apparatus of hydroelectric generating set A6 on Hydro Power Plant Djerdap 1, Energija (Energija, ekonomija, ekologija), Vol. 14, No. 1-2, pp. 197-202, 2012.
  • Arsić, M., Bošnjak, S., Grabulov, V., Međo, B., Savić, Z.: Integrity of Beam Braces and Threaded Spindle for Conjoint Operation of Two 5 MN Bridge Cranes, , Energija (Energija, ekonomija, ekologija), Vol. 17, No. 1-2, pp. 319-324, 2015.
  • Arsić, M., Vistać, B. Bošnjak, S., Mladenović, M., Savić, Z.: Analysis of Current State and Integrity Evaluation for the Air Tank of the Regulation System of Turbine A6 at Hydropower Plant Djerdap 1, Energija (Energija, ekonomija, ekologija), Vol. 16, 1-2, pp. 385-391, 2014.
  • Arsić, M., Savić, Z., Bošnjak, S., Gašić, V., Arsić, D.: State Analysis of Components of the Damaged Structure and Integrity Evaluation of Braces at the Spreader A2Rs – B 5500.55 + BRs, Energija (Energija, ekonomija, ekologija), Vol. 18, No. 1-2, pp. 257-261, 2016.
  • Zrnić,, Đorđević, M., Dragović, B., Bošnjak, S.: Eco Issues in Bulk Materials Handling Technologies in Ports, Annals of University “Eftimie Murgu” Resita, Vol. XVIII, No. 1, Romania, pp. 83-92, 2011.
  • Gašić, V., Zrnić, N., Obradović, A., Bošnjak, S.: Consideration of Moving Oscillator Problem in Dynamic Responses of Bridge Cranes, FME Transactions, Vol. 39, No 1, Faculty of Mechanical Engineering Belgrade, pp. 17-24, 2011.
  • Arsić, M., Mladenović, M., Savić, Z., Bošnjak, S., Miković, R.: State Analisys of the Upper Ring of Guide Vane Apparatus at Hydro Power Plant Djerdap 1 Carried Out the Basis of Non Destructive Tests, Energija (Energija, ekonomija, ekologija), Vol. 19, No. 1-2, pp. 245-249, 2017.
  • Arsić, M., Mladenović, M., Savić, Z., Bošnjak, S.: Integrity evaluation for the welded structure of the bucket-whell excavator through the use of non destructive testing metods, Energija (Energija, ekonomija, ekologija), Vol. 19, No. 1-2, pp. 241-244, 2017.
  • Arsić, M., Grabulov, V., Mladenović, M., Savić, Z., Bošnjak, S.: Repair Welding Technology for the Glasses of the Kaplan Turbine Runner at the Hydro Power Plant ’Djerdap 1’, Energija (Energija, ekonomija, ekologija), Vol. 18, No. 1-2, pp. 262-267, 2016.

2.2.2  Радови у истакнутим националним часописима (категорија М52)

  • Bošnjak, S., Petković, Z., Đorđević, M.: Tehnička rešenja kao fundamentalni rezultati projekta iz programa tehnološkog razvoja, Tehnika – Mašinstvo, Vol. 60, No 1, pp. 67 – 74, Beograd, 2011.
  • Bošnjak, S.: Neki problemi dinamike i čvrstoće mašina visokih performansi, Journal of Applied Engineering Science, Vol. 8, issue 1, pp. 1-12, 2010.
  • Бошњак, С., Петковић, З., Гашић, В., Зрнић, Н.: Претоварни мостови са елеваторима – Део II: Конструкционо решење, технологија и прорачун реконструисане структуре, Техника – Машинство (56), Vol. LXI, бр.1, стр. 7–13, Београд, 2007.
  • Бошњак, С., Петковић, З., Гашић, В., Зрнић, Н.: Претоварни мостови са елеваторима – Део I: Идентификација оптерећења, прорачун структуре и закошавање, Техника – Машинство (55), Vol. LXI, бр.6, стр. 1–8, Београд, 2006.
  • Bošnjak, S., Zrnić, N, Oguamanam, D.: On the Dynamic Modelling of Bucket Wheel Excavators, FME Transactions, Volume 34, Number 4, pp. 221 – 226, University of Belgrade, Faculty of Mechanical Engineering, 2006.
  • Bošnjak, S., Petković, Z., Matejić, P., Zrnić, N., Petrić, S., Simonović, A: Analysis of Stress-Strain State of Bucket Wheel Excavator Revolving Platform Structure – Fundamnet of Efficient Reconstruction, Structural Integrity and Life, Vol. 5, No. 3, pp. 129-142, Journal of the Society for Structural Integrity and Life, 2005.
  • Bošnjak, S., Gašić, V., Petković, Z.: Determination of resistances to coal reclaiming at bridge – type stacker – reclaimer with bucket chain booms, FME Transactions, Volume 33, Number 2, pp. 79 – 88, University of Belgrade, Faculty of Mechanical Engineering, 2005.
  • Зрнић, Н., Бошњак, С., Гашић, В.: Индустрија и пројектовање дизалица високих перформанси за претовар контејнера и расутих материјала, Journal of Applied Engineering Science, Vol. 6, issue 19, pp. 7-16,
  • Oguamanam, D., Bošnjak, S., Zrnić, N.: On the Dynamic Modelling of Flexible Manipulators, FME Transactions, Volume 34, Number 4, pp. 231 – 237, University of Belgrade, Faculty of Mechanical Engineering, 2006.
  • Zrnić, N, Oguamanam, D., Bošnjak, S.: Dynamics and Modelling of Mega Quayside Container Cranes, FME Transactions, Vol. 34, No. 4, pp. 193 – 198, University of Belgrade, Faculty of Mechanical Engineering, 2006.
  • Zrnić, N, Petković, Z., Bošnjak, S.: Automation of Ship-to-Shore Container Cranes: A Review of State – of – the Art, FME Transactions, Volume 33, Number 3, pp. 111 – 121, University of Belgrade, Faculty of Mechanical Engineering, 2005.
  • Arsić, M., Vistać, B., Bošnjak, S., Bošković, G., Savić, Z.: Guidelines for technical regulations and standardization of turbine and hydromechanical equipment during production and exploitation, IMK-14 Research&Development in Heavy machinery, Vol. 20, No. 1, pp. EN1-EN7, 2014.
  • Putić, , Stamenović, M., Stajčić, P., Bajčeta, B., Bošnjak, S.: Investigation method of torsional properties and damages of glass/epoxy composite pipes, Acta Periodica Technologica, APTEFF, 37, 1-192, pp. 97-106, 2006.
  • Putić, , Stamenović, M., Bajčeta, B., Stajčić, P., Bošnjak, S.: Low-temperature tension properties of glass-epoxy composite materials, Acta Periodica Technologica, APTEFF, 36, 1-266, pp. 123-134, 2005.

2.2.3 Радови у националним часописима (категорија М53)

  • Bošnjak, S., Petković, Z., Zrnić, N.: Improvements of the conveying machinery in thermal power plants – case studies, Machine Design, Vol. 3, No. 1,edited by S. Kuzmanović, pp. 55-60, University of Novi Sad, 2011.
  • Bošnjak, S., Gnjatović, N., Zrnić, N.: Redesign of connecting eye-plate of the bucket wheel boom hoisting system, Machine Design, ISSN: 1821-1259, pp. 31-34, University of Novi Sad, 2010.
  • Bošnjak, S., Zrnić, N., Gnjatović, N.: Geometry of the substructure as a cause of bucket wheel excavator failure, Machine Design, ISSN: 1821-1259, pp. 135-140, University of Novi Sad, 2009.
  • Bošnjak, S., Gašić, V., Zrnić, N, Petković, Z.: Static/Dynamic analysis of reconstructed structure of special coal stacker-reclaimer, Journal of Mechanical Engineering Design, Volume 10, Number 2, pp. 31 – 37, ADEKO, FTN Novi Sad, 2007.
  • Бошњак, С., Симоновић, А., Петковић, З., Зрнић, Н.: Упоредна анализа чврстоће варијантних конструкционих решења доње градња роторног багера KRUPP C-700S, Journal of Applied Engineering Science, Vol. 4, issue 14, pp. 19-28, 2006.
  • Бошњак, С., Петковић, З., Матејић, П., Зрнић, Н., Гашић, В.: Роторни багери и претоварни мостови за угаљ – проблеми чврстоће у експлоатацији, Енергија, Година IV, број 2, pp. 095 – 100, Савез енергетичара, Београд, 2005.
  • Petković, Z., Bošnjak, S., Gašić, V.: Redesign of the tribune structure in the Belgrade Arena Hall, Machine Design, Vol. 3, No. 1, edited by S. Kuzmanović, pp. 41-46, University of Novi Sad, 2011.
  • Zrnić, N., Bošnjak, S., Đorđević, M.: Design for modernization – A way for implementation of eco improvements of port’s cranes, Machine Design, ISSN: 1821-1259, 13-18, University of Novi Sad, 2010.
  • Zrnić, N., Bošnjak, S., Gašić, V.: Estimation of structural design parameters of high performance cranes by using sensitivity functions, Machine Design, ISSN: 1821-1259, pp. 105-110, University of Novi Sad, 2009.
  • Zrnić, N, Petković, Z., Bošnjak, S.: Basic principles in design of large container cranes (part I): Mechanical design of trolley and environmental impact, Journal of Mechanical Engineering Design, Volume 8, Number 1, pp. 10 – 23, Jugoslovensko društvo za mašinske elemente i konstrukcije, Beograd, 2005.
  • Zrnić, N, Petković, Z., Bošnjak, S.: Basic principles in design of large container cranes (part II): Historical development in design, evolution of container cranes industry and procurement strategy, Journal of Mechanical Engineering Design, Volume 8, Number 2, pp. 21 – 32, ADEKO, FTN Novi Sad, 2005.
  • Petković, Z., Gašić, V., Bošnjak, S.: Comparative overwiew of simplified dynamic and finite element model of boom structure at special coal stacker – reclaimer, Journal of Mechanical Engineering Design, Volume 8, Number 2, pp. 41 – 46, ADEKO, FTN Novi Sad, 2005.

3.1  Радови саопштени на скупу националног значаја, штампани у целини (категорија М63)

  • Бошњак, С.: Одређивање параметара струготине код роторних багера са радијалним ископом материјала, Зборник радова научно-стручног скупа ”Транспорт у индустрији”, стр. 168-173, Машински факултет Универзитета у Београду, Београд, 1992.
  • Бошњак, С.: О примени методе редукованих маса на проблем трансверзалних осцилација конзолних носача, Зборник радова 20-ог југословенског конгреса теоријске и примењене механике, секција Ц, стр. 192-195, Југословенско друштво за механику, Крагујевац, 1993.
  • Бошњак, С.: Одређивање положаја компоненти отпора копања у односу на ротор багера са радијалним ископом материјала, Зборник радова првог међународног научно-стручног скупа ”Тешка машиноградња”, стр. 79-84, Машински факултет Краљево, Врњачка Бања, 1993.
  • Бошњак, С.: Анализа утицаја положаја ротора и смера обртања платформе на оптерећење роторног багера, Зборник радова 13-ог међународног научно-стручног скупа ”Транспорт у индустрији”, стр. 33-38, Машински факултет Универзитета у Београду, Београд, 1994.
  • Бошњак, С., Петковић, З., Тошић, С.: Симулација спољашњег оптерећења роторног багера изазваног отпором копању, Зборник радова Међународне научне конференције ”Тешка машиноградња” , стр. 27-3.32, Машински факултет Краљево, Краљево, 1996.
  • Bošnjak, S., Gnjatović, N., Đorđević, M., Milovančević, M., Petković, Z.: Stress concentration around circular holes – cause of failures of the bucket wheel excavators substructures, Proceedings of the VIII Intenational conference “NONMETALS” (ISBN 978-86-83497-12-6), Yugoslav opencast mining committee, pp. 13-23, Vrujci, 2009.
  • Петковић, З., Бошњак, С.: Утицај крутости носеће конструкције роторних багера на динамичку стабилност система, Зборник радова 20-ог југословенског конгреса теоријске и примењене механике, секција Ц, стр. 200-203, Југословенско друштво за механику, Крагујевац, 1993.
  • Зрнић, Н., Бошњак, С., Петковић, З.: Анализа динамичког понашања претоварног моста за транспорт расутих материјала, Зборник радова међународног научно-стручног скупа о достигнућима електро и машинске индустрије „ДЕМИ 2005“, стр. 651-656, Бања Лука, Република Српска, БИХ, 2005.
  • Zrnić, N., Bošnjak, S., Petković, Z.: Bezdimenzionalni modeli kao osnova za ocenu uticaja parametra strukture na dinamiku pretovarnih mostova, Proceedings of the 8th International Conference on Accomplishments in Electrical, Mechanical and Informatic Engineering DEMI 2007, Mašinski Fakultet Banja Luka, pp. 57-62, Republika Srpska, BIH, 2007.
  • Arsić M., Bošnjak S., Međo B., Burzić M., Vistać B., Savić Z.: Influence of Loading Regimes and Operational Environment on Fatigue State of Components of Turbine and Hydromechanical Equipment at Hydropower, International Conference Power Plants 2012 (ISBN 978-86-7877-021-0), Zlatibor, pp. 1-10 (Files on the CD),
  • Arsić, M., Bošnjak, S., Jokić, Lj., Miković, R., Mladenović, M.: Utvrđivanje uzroka degradacije osnovnog materijala i zavarenih spojeva poklopca turbine agregata A4 na hiroelektrani Đerdap 1, XIX Konferencija o međulaboratorijskim ispitivanjima materijala – KOMIM, Užice – Bela Zemlja, Zbornik radova, pp. 80-88, 2013.
  • Петковић, З., Бошњак, С., Тошић, С.: Динамички модели механизма погона ротора и обртне платформе роторних багера са радијалним ископом, Зборник радова Међународне научне конференције ”Тешка машиноградња”, стр. 22-6.27, Машински факултет Краљево, Краљево, 1996.
  • Миловић, П., Бошњак, С., Матејић, П.: Удар кашике о стрелу багера са повлачном кашиком, Зборник радова 13-ог међународног научно-стручног скупа ”Транспорт у индустрији”, Машински факултет Универзитета у Београду, стр. 269-273, Београд, 1994.
  • Тошић, С., Бошњак, С.: Одређивање максималних сила затезања вучних ужади код клатнених путничких жичара, Зборник радова 20-ог југословенског конгреса теоријске и примењене механике, секција Ц, стр. 204-207, Југословенско друштво за механику, Крагујевац, 1993.
  • Тошић, С., Бошњак, С., Петковић, З.: Специфичности констукција и прорачуна тракастих транспортера код машина за континуални ископ материјала тла, Зборник радова Међународне научне конференције ”Тешка машиноградња”, стр. 32-6.37, Машински факултет Краљево, Краљево, 1996.
  • Тошић, С., Бошњак, С.: Конструкције браника и одбојника за ублажавање силе удара покретне масе дизалице или возног витла, Зборник радова 5-ог Северовог симпозијума о електромеханичким преносницима, стр. 244-251, Суботица, 1995.
  • Петковић, З., Бошњак, С.: Реолинеарне нискофреквентне осцилације носеће структуре роторног багера у вертикалној равни, Зборник радова првог међународног научно-стручног скупа ”Тешка машиноградња”, стр. 31-36, Машински факултет Краљево, Врњачка Бања, 1993.
  • Миловић, П., Бошњак, С.: Моделирање подструктуре телескопирајуће стреле мобилне хидрауличне дизалице, Зборник радова научно-стручног скупа ”Транспорт у индустрији”, стр. 292-297, Машински факултет Универзитета у Београду, Београд, 1992.
  • Миловић, П., Бошњак, С.: Одржавање хоризонталног положаја пода корпе мобилне подизне платформе спрегнутим хидрауличним цилиндрима, Зборник радова научно-стручног скупа ”Транспорт у индустрији”, стр. 151-156, Машински факултет Универзитета у Београду, Београд, 1992.
  • Миловић, П., Бошњак, С.: Одређивање тренутних интезитета компоненти спољашњег оптерећења роторног багера применом рачунара, Зборник радова SYM-OP-IS, стр.315-318, Машински факултет Универзитета у Београду, Београд, 1991.
  • Острић, Д., Бошњак, С., Крстић, Д.: Моделирање стреле ауто-пумпе за бетон, Зборник радова 11-ог научно-стручног скупа (са међународним учешћем) о транспортним процесима у индустрији, стр. 139-144, Машински факултет Универзитета у Београду, Београд, 1990.
  • Миловић, П., Бошњак, С.: Одређивање одговора стреле платформе ТХП-15 на случајну побуду изазвану земљотресом, Зборник радова 11-ог научно-стручног скупа (са међународним учешћем) о транспортним процесима у индустрији, стр. 208-214, Машински факултет Универзитета у Београду, Београд, 1990.
  • Миловић, П., Бошњак, С.: Развој хидрауличних подизних платформи, Зборник радова 11-ог научно-стручног скупа (са међународним учешћем) о транспортним процесима у индустрији, стр. 145-151, Машински факултет Унивезитета у Београду, Београд, 1990.
  • Миловић, П., Бошњак, С.: Одређивање геометријских карактеристика захватног уређаја хидрауличног багера са дубинском кашиком, Зборник радова 16-те ЈУПИТЕР конференције, стр. 79-84, Цавтат, 1990.
  • Петковић, З., Бошњак, С., Матејић, П.: Анализа напонских стања услед локалних савијања појаса I носача, Зборник радова 13-ог међународног научно-стручног скупа ”Транспорт у индустрији”, Машински факултет Универзитета у Београду, стр. 337-342, Београд, 1994.
  • Петковић, З., Бошњак, С., Матејић, П.: Диференцијалне једначине кретања роторног багера у вертикалној равни које обухватају утицај осциловања носеће конструкције на димензије одреска, Зборник радова 13-ог међународног научно-стручног скупа ”Транспорт у индустрији”, Машински факултет Универзитета у Београду, стр. 331-336, Београд, 1994.
  • Arsić, M., Mladenović, M., Savić, Z., Bošnjak, S., Međo, B.: Integritet zatega grede i navojnog vretena za zajednički rad dve mostne dizalice od 5 MN, Međunarodno savetovanje IBR 2014 (pod pokroviteljstvom Evropske federacije za IBR – European Federation for Nondestructive Testing – EFNDT), Fruška gora, Zbornik radova na CD, pp. 8, 2014.
  • Arsić, M., Bajić, D., Mladenović, M., Bošnjak, S.: Utvrđivanje uzroka degradacije osnovnog materijala i zavarenih spojeva račve cevovoda na hidroelektrani Perućica, XX Konferencija o međulaboratorijskim ispitivanjima materijala – KOMIM, Kragujevac, Zbornik radova, pp. 49-54, 2014.
  • Pantelić, M., Papić, Lj., Bošnjak, S.: Održavanje rudarske opreme i faktori koji doprinose njihovom trošku, III Simpozijum sa međunarodnim učešćem „ RUDARSTVO 2012“, ISBN: 978-86-80809-69-4, Zlatibor, 07 maj – 10 maj 2012, pp 25-37, 2012.
  • Pantelić, M., Papić, Lj., Bošnjak, S.: Pouzdanost i pogodnost održavanja bagerskih jedinica sa osvrtom na njihov reinženjering, Zbornik Radova II Međunarodne Konferencije “TENOR 2011”, Narodna biblioteka “Filip Višnjić”, Bijeljina, pp. 205-215, 2011, ISBN 978-99955-48-09-4.
  • Pantelić, M., Papić, LJ., Bošnjak, S.: Personnels impact on the reliability of excavating units, Proceedings of the 1st International symposium „MINING 2010“ – Modern technologies in mining and environmetal protection (ISBN 978-86-80809-49-6), Privredna komora Srbije, pp. 113-120, Tara, 24-26 maj 2010.
  • Gašić, V., Zrnić, N., Bošnjak, S.: Koncepti i problemi proračuna savremenih mašina za rasute terete, Proceedings of the 8th International Conference on Accomplishments in Electrical, Mechanical and Informatic Engineering DEMI 2007, Mašinski Fakultet Banja Luka, pp. 29-34, Republika Srpska, BIH, 2007
  • Вељић, М., Тошић, С., Бошњак, С., Петковић, З.: Прилог анализи посебних конструкција елеватора са кофицама са транспорт житарица, Зборник радова Међународне научне конференције ”Тешка машиноградња”, стр. 62-6.67, Машински факултет Краљево, Краљево, 1996.
  • Миловић, П., Матејић, П., Бошњак, С.: Упоредна анализа напонског стања ламеласте куке посебне намене, одређеног применом теорије кривог штапа и МКЕ, Зборник радова 13-ог међународног научно-стручног скупа ”Транспорт у индустрији”, Машински факултет Универзитета у Београду, стр. 274-279, Београд, 1994.
  • Миловић, П., Митровић, Р., Бошњак, С.: Анализа оптерећења и узрока отказа лежаја вратила ротора багера TAKRAF SRs-1300, Зборник радова првог међународног научно-стручног скупа ”Тешка машиноградња”, стр. 26-30, Машински факултет Краљево, Врњачка Бања, 1993.
  • Седмак, А., Гњатовић, Б., Миловић, П., Бошњак, С.: Прорачун стабилности цилиндричних силоса, Зборник радова међународног саветовања ”Заваривање и испитивање грађевинских конструкција”, стр. 1-9, Југословенски савез за заваривање, Београд, 1987.